Xpres Subli-Print Epson 4450 Pro: CorelDRAW 10+ Instruct Manuel d'utilisateur télécharger pdf

Setting up CorelDRAW 10 +

Diagram 2

Before you start this section you will need to download the Xpres Subli-Print colour profile from the Xpres website.

The address is

www.xpres.co.uk/tech_support/downloads You can also find the profile on the Subli-Print CD supplied with

the bulk feed system. This disk can also be sent out upon request.

Close CorelDRAW. When you have downloaded the 'Subli_Print_4450_V1.icm' colour profile, right click on it and

choose 'Install Profile' from the top of the menu. Note: The profile will install automatically and will not give any feedback.

Also on some systems you will not be able to see the 'Install Profile' option. If this is the case change the .ICM extension

to .ICC then re-try.

Start CorelDRAW and click on Window > Colour Palettes. Tick the 'Default RGB palette'. Repeat the process then

un-tick 'Default CMYK palette'. Now click on Tools > Colour Management. You will now see the colour management

dialogue box appear as in diagram 1 below.

First, all the (Orange/Grey) arrows need to be set as shown above. To change the colour of the

arrows (Orange colour switched on, Gray colour switched off). To turn the arrows on or off just click

on the arrow itself.

Configure Import-Export Settings: Click on the image of the paper to bring up the window shown

below (diagram 2). This window configures how CorelDRAW handles files that are imported to a

document.

Composite Printer: Select the Subli_Print_4450_V1 printer profile. Note: if you cant choose the

Subli_Print_4450_V1 from the drop down menu means the ICC profile is not yet installed on your

pc or you may not have restarted Corel since the ICC installation. Close and re-launch Corel.

Click Import: Always covert Using- Select Internal RGB Fraser

(1998) from the drop down menu.

Click Export: Always embed using- Select Internal RGB Fraser

(1998) from the drop down menu.

Click OK.

Diagram 1

4450

For CorelDRAW X3,

ensure you select RGB

under the 'color mode

used for effects' section

at the bottom on the

colour management

console.

1 2

Setting up CorelDRAW 10 + 1

Résumé du contenu

Page 1 - Setting up CorelDRAW 10 +

1Setting up CorelDRAW 10 +Diagram 2Before you start this section you will need to download the Xpres Subli-Print colour profile from the Xpres website

Page 2

23.4.5. Monitor: Select the ICC profile for your monitor (If you also have Adobe Photoshop on your system you can select the profile you created in Ad

Commentaires sur ces manuels

Pas de commentaire

Xpres Subli-Print Epson 4450 Pro: CorelDRAW 10+ Instruct Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Xpres Subli-Print Epson 4450 Pro: CorelDRAW 10+ Instruct. Xpres Subli-Print Epson 4450 Pro: CorelDRAW 10+ Instructions User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Xpres Subli-Print Epson 4450 Pro: CorelDRAW 10+ Instruct